QUESTION: 3
How do you manually confgure a vNIC MAC address?
A. Use the mac -address-table statc command.
B. Modify the dynamic vNIC connecton policy.
C. Use the set identty dynamic-mac command.
D. Modify the adapter policy.
Answer: D
Wednesday, 1 March 2017
Thursday, 23 February 2017
400-151 Sample Question : 2
QUESTION: 2
Within an ACI fabric, a routng protocol is needed to assist with route redistributon between the outside networks and the internal fabric. Which routng protocol is needed to run in the fabric at locaton 1 to allow the VM access to the networks advertsed by the external Layer 3 network.
A. eBGP
B. OSPF
C. MP-BGP
D. iBGP
E. IS-IS
Answer: C
Within an ACI fabric, a routng protocol is needed to assist with route redistributon between the outside networks and the internal fabric. Which routng protocol is needed to run in the fabric at locaton 1 to allow the VM access to the networks advertsed by the external Layer 3 network.
A. eBGP
B. OSPF
C. MP-BGP
D. iBGP
E. IS-IS
Answer: C
Wednesday, 1 February 2017
400-151 Sample Question : 1
QUESTION: 1
Which three guidelines and limitation of policy-based routing are true? (Choose 3)
A. A match command can refer to more than one ACL in a route map used for policy-based routing
B. The same route map can be shared among different interfaces for policy-based routing as long as the interfaces belong to the same VRF instance
C. Setting a tunnel interface or an IP address via a tunnel interface as a next hop in a policy-based routing policy is not supported
D. An ACL used in a policy-based routing route map cannot include a deny statement
E. A policy-based routing route mao can have multiple match or set statements per route-map statement
F. Policy-based routing and WCCPv2 are not supported on the same interface chaining is disabled
Answer: B,C,D
Which three guidelines and limitation of policy-based routing are true? (Choose 3)
A. A match command can refer to more than one ACL in a route map used for policy-based routing
B. The same route map can be shared among different interfaces for policy-based routing as long as the interfaces belong to the same VRF instance
C. Setting a tunnel interface or an IP address via a tunnel interface as a next hop in a policy-based routing policy is not supported
D. An ACL used in a policy-based routing route map cannot include a deny statement
E. A policy-based routing route mao can have multiple match or set statements per route-map statement
F. Policy-based routing and WCCPv2 are not supported on the same interface chaining is disabled
Answer: B,C,D
Thursday, 19 January 2017
350-080 Sample Question : 10
QUESTION: 10
Which two statements about Cisco Nexus 7000 line cards are true? (Choose two.)
A. M1, M2, and F1 cards are allowed in the same VDC.
B. M line cards are service-oriented and likely face the access layer and provide Layer 2 connectivity.
C. F line cards are performance-oriented and likely connect northbound to the core layer for Layer 3 connectivity.
D. M line cards support Layer 2, Layer 3, and Layer 4 with large forwarding tables and a rich feature set.
E. The F2 line card must reside in the admin VDC.
Answer: A,D
Which two statements about Cisco Nexus 7000 line cards are true? (Choose two.)
A. M1, M2, and F1 cards are allowed in the same VDC.
B. M line cards are service-oriented and likely face the access layer and provide Layer 2 connectivity.
C. F line cards are performance-oriented and likely connect northbound to the core layer for Layer 3 connectivity.
D. M line cards support Layer 2, Layer 3, and Layer 4 with large forwarding tables and a rich feature set.
E. The F2 line card must reside in the admin VDC.
Answer: A,D
Monday, 8 August 2016
350-080 Sample Question : 9
QUESTION: 9
In a configuration with redundant supervisors, how many IP addresses are required to configure full remote access via management 0?
A. two IP addresses, one for each supervisor
B. three IP addresses, one virtual IP and one physical IP for each supervisor
C. one IP address that is shared among supervisors
D. none management 0 will use the IP address from the first SVI that is created
Answer : C
In a configuration with redundant supervisors, how many IP addresses are required to configure full remote access via management 0?
A. two IP addresses, one for each supervisor
B. three IP addresses, one virtual IP and one physical IP for each supervisor
C. one IP address that is shared among supervisors
D. none management 0 will use the IP address from the first SVI that is created
Answer : C
Friday, 22 July 2016
350-080 Sample Question : 8
QUESTION: 8
FabricPath brings the benefits of routing protocols to layer 2 network Ethernet environments. What are the advantages of using FabricPath technology? (Choose three.)
A. FabricPath provides MAC address scalability with conversational learning
B. Loop mitigation with TTL in the frame field
C. STPl independence
D. 10 Gbps bandwidth
E. Layer 2 extensions between data centers
Answer : A,B,C
FabricPath brings the benefits of routing protocols to layer 2 network Ethernet environments. What are the advantages of using FabricPath technology? (Choose three.)
A. FabricPath provides MAC address scalability with conversational learning
B. Loop mitigation with TTL in the frame field
C. STPl independence
D. 10 Gbps bandwidth
E. Layer 2 extensions between data centers
Answer : A,B,C
Subscribe to:
Posts (Atom)
